Filter
Top Products
D1265 | Owner's Manual | Part IV: Multi-Area Use
Bosch Security Systems, Inc. | 9/10 | F01U169130-02 61
View Point Status
Use this function to identify the number or location of
each point in an area, and to show the current
condition of any point you select.
1. Ensure your keypad shows idle disarmed text.
2. Press the Menu button to enter the function list.
3. Press Next repeatedly until you reach the View
Point Status button.
Press the button.
4. In this example, Area 1 is the area and there are
five points assigned to area 1 that can be
viewed.
Press the Next button to view the first point in
the last area; press the Previous button to view
the last point in the area. You can press the Exit
button at any time to exit this function.
5. The top line shows the point text. The second
line shows the area assignment of the current
point and the point number. The third line
shows the points current state {Normal, Open,
Short, Missing}.shows the point text.
Pressing the Next button takes you to the next
point in the area whereas the Previous button
takes you to the previous point in the area.
6. Refer to Table 5 for more information.
Table 5: Screen Area Definitions
Line # Area
Name
Definition
1 Point text This displays the customized name
for the point.
Area # This displays the area number. 2
Pt # This displays point numbers 1 to
127 and 129 to 247.
Normal Indicates that the point
is not in the faulted
state.
Open Indicates that the point
is in an open state.
Short Indicates that the point
is in a shorted state.
3 (Point
State),
HW
Missing Indicates that the point
is missing.