Filter
Top Products
D1265 | Owner's Manual | Part II: System Commands
22 Bosch Security Systems, Inc. | 9/10 | F01U169130-02
4. The display shows Perimeter On Instant.
After arming the perimeter without delays, you
cannot enter or exit the premises without
disarming the system. Opening a perimeter
door before disarming generates an alarm. If
this happens, silence the alarm by turning your
system off and call your security company to let
them know that it is not an emergency situation.
Perimeter Delay (CMD + 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only
arm the perimeter and exit through a door
programmed for exit delay. The interior of the
building remains disarmed. People or pets are free to
move throughout the interior of the premises.
This function is also useful in commercial systems
when you are working before or after business hours
and wish to have the perimeter armed. Other system
users can enter through doors programmed for entry
delay, which starts the entry delay sounder and
countdown.
Using Perimeter Delay
Interior points are not armed with this command
and might remain faulted while arming with
COMMAND 3.
1. Press the CMD button.
2. The display shows *System Command*.
3. Press the 3 button.
If you prefer, you might use the function
list in place of Steps 1 through 3 to
initiate this function.
Press the Menu button to enter the
function list.
Press the Next button repeatedly.
When you reach the Perimetr Arm Delay
button, press it.
4. The display shows Exit Now! # seconds
remaining
(# = exit delay time remaining).
After the exit delay expires, Perimeter On
Delayed
is shown.
5. To disarm your security system, enter your
personal passcode and press ENTER.
The display then returns to idle text.