Filter
Top Products
D1265 | Owner's Manual | Part II: System Commands
26 Bosch Security Systems, Inc. | 9/10 | F01U169130-02
Watch Mode (CMD + 6)
Description
With your security system disarmed, you can use
watch mode to monitor some points. Each time some
points are faulted (door or window is opened) the
keypad chimes once and shows the point text for 60
sec. No alarms are generated by this mode except 24-
hour alarms (fire, panic, and so on).
Use this function in residential systems to monitor
entries or exits in your home. In commercial systems it
can serve as a door chime to alert you when a
customer or delivery person enters your business.
Contact your security company to find out
which points are watch points and
whether or not your system automatically
turns the Watch Mode on whenever you
disarm.
Using Watch Mode
Description
With your security system disarmed, you can use
watch mode to monitor some points. Each time some
points are faulted (door or window is opened) the
keypad chimes once and shows the point text for 60
sec. No alarms are generated by this mode except 24-
hour alarms (fire, panic, and so on).
When the keypad’s keypad lighting is on, the keypad
will not chime. The buttons light for 20 sec whenever
you press a button.
Use this function in residential systems to monitor
entries or exits in your home. In commercial systems it
can serve as a door chime to alert you when a
customer or delivery person enters your business.
Contact your security company to find out
which points are watch points and
whether or not your system automatically
turns the Watch Mode on whenever you
disarm.
Entering Watch Mode
1. The display shows disarmed idle text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 6 button.
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
Press Next button repeatedly.
When you reach the Watch Mode button,
press it.
4. The display briefly shows Watch Mode is now
on.
The display returns to show idle text.
Exiting Watch Mode:
1. Ensure the display shows disarmed idle text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 6 button.