Filter
Top Products
D1265 | Owner's Manual | Part IV: Multi-Area Use
Bosch Security Systems, Inc. | 9/10 | F01U169130-02 63
4. The display changes and shows Master Arm
All with the following options:
Previous button– scrolls to the last area that
can be armed (based on passcode and authority
level)
Next button – scrolls to the first area that can
be armed (based on passcode and authority
level)
Arm button – arms all areas (based on passcode
and authority level)
Exit button – returns the display to idle text
5. If the Next button is pressed, the first area that
can be armed (based on passcode entered and
user authority level) is shown (AREA 1
WAREHOUSE is used an example of the first
area that can be armed).
6. Pressing the Arm button causes AREA 1
WAREHOUSE is now arming… to display for
3 sec before the prompt to arm the next
available area is shown.
Turning on Multiple Areas with a Passcode
You can use your personal passcode to turn on both
perimeter and interior points in all areas where your
passcode has authority. If there are areas already
turned on, this function rearms those areas in addition
to turning on all authorized areas that are currently off.
1. Enter your passcode and press ENTER.
2. The keypad shows the following:
Keypad scope and/or your authority level limit
the actual number of areas you might turn on.
For example, if you have authority to arm all
areas but the scope of the keypad you’re using
is limited to areas 1, 2, and 5, then you only can
turn on areas 1, 2, and 5.
3. If a point is faulted (door or window open for
example). Refer to Turning On the System
(Arming) With Doors or Windows Open on page 17
for more information.
Faulted Points in Other Areas
If there is a faulted point in an area you select (other
than the one you are in), Check Area 1
(1 is used as
an example here) appears for 3 sec and then the
display returns to the area disarmed idle text.
If there is a faulted point in more than one area and
the system is being armed, the display prompts Check
Area 1
3
meaning there are faulted points in Areas 1
and 3.
Try one of the following:
Clear faulted points (close doors and/or windows)
and return to step 1.
Bypass faulted points (if your system and/or
authority allows) and return to step 1.
Force arm (if your system and/or authority allows).
Refer to Turning On the System (Arming) With Doors
or Windows Open on page 17 for more information.