Filter
Top Products
D1265 | Owner's Manual | Part III: Advanced Commands
36 Bosch Security Systems, Inc. | 9/10 | F01U169130-02
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
Press the Next button repeatedly.
When you reach the Remote Program
button, press it.
Press ENTER.
7. The display shows RPS connecting…
8. The security system now allows RPS to connect
over the phone line or over the network to the
control panel.
9. At the conclusion of the programming session
your system sends a report to the security
company and then returns your telephone to
normal service and your display to idle text.
For systems with a phone number configured
My system uses a phone number for Remote
Programming
1. Ensure your keypad shows idle disarmed text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 4 button then the 3 button.
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
Press the Next button repeatedly.
When you reach the Remote Program
button, press it.
Press ENTER.
4. Select RPS via Phone.
5. The display shows RPS connecting…
6. The security system now calls the telephone
number specified for the remote programming
session.
7. At the conclusion of the programming session
your system sends a report to the security
company and then returns your telephone to
normal service and your display to idle text.
For systems with a network connection
My system uses an IP Address and network
connection for Unattended Remote
Programming
1. Ensure your keypad shows idle disarmed text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 4 button then the 3 button.