Key Description
monitor time Displays the amount of time since the monitor
interface command was entered.
time Displays the amount of time the chassis is up (since last
reboot).
m Change the view from a single interface to all interfaces on
the line card or visa-versa.
c Refresh the view.
b Change the counters displayed from Packets on the
interface to Bytes.
r Change the [delta] column from change in the number of
packets/bytes in the last interval to rate per second.
l Change the view to the next interface on the line card, or if
in line card mode, the next line card in the chassis.
a Change the view to the previous interface on the line card,
or if in line card mode, the previous line card in the chassis.
T Increase the screen refresh rate.
t Decrease the screen refresh rate.
q Return to the CLI prompt.
Example
Dell# monitor interface fortyGigE 2
Dell Networking operating system uptime is 3 minute(s)
Monitor time: 00:00:00 Refresh Intvl.: 2s
Interface Link In Packets [delta]
Out Packets [delta]
Fo 2/4 Up 2
0 2 0
Fo 2/8 Down 0
0 0 0
Fo 2/12 Down 0
0 0 0
Fo 2/16 Up 1
0 1 0
Fo 2/20 Up 1
0 1 0
Fo 2/24 Down 0
0 0 0
Fo 2/28 Up 2
0 1 0
Fo 2/32 Up 1
0 2 0
Fo 2/36 Down 0
0 0 0
Fo 2/40 Up 0
0 2 0
Fo 2/44 Up 0
0 2 0
Fo 2/48 Down 0
0 0 0
856
Interfaces
