A SERVICE OF

logo

applied. TxBytes displays the number of bytes transmitted to a control-plane CPU
after protocol-based rate limiting is applied. Drops displays the number of bytes of
control-plane traffic that have been dropped as a result of protocol-based rate
limiting.
The number of RxBytes is calculated as: Drops/<packet-size> + TxBytes/<packet-
size + 4 bytes> = RxBytes (total packets received)
To clear the per-protocol counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the clear control-
traffic protocol command.
Example
Dell#show control-traffic protocol linecard 2 portset 0
counters
Protocol RxBytes
TxBytes Drops
------- -------
------- -----
STP 14956278172
403036 14955875136
LLDP 15029657016
559096 15029097920
PVST 0
0 0
LACP 15122824104
556648 15122267456
GVRP 14988129080
551480 14987577600
ARP RESP/ARP REQ 29604578172
3559868 29601018304
802.1x 0
0 0
FEFD 0
0 0
FRRP 0
0 0
ECFM 0
0 0
L2PT 0
0 0
ISIS 0
0 0
BFD 0
0 0
BGP 0
0 0
v6 BGP 0
0 0
OSPF 0
0 0
v6 OSPF 0
0 0
RIP 0
0 0
VRRP 0
0 0
v6 VRRP 0
0 0
IGMP 0
0 0
Control Plane Policing (CoPP)
595