Related
Commands
permit regex — permits a community using a regular expression.
description
To designate a meaningful description to the extended community, use this feature.
Z9500
Syntax
description {line}
To remove the description, use the no description {line} command.
Parameters
line Enter a description (maximum 80 characters).
Defaults Not configured.
Command
Modes
CONFIGURATION (conf-ext-community-list)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
ip extcommunity-list
To enter the Extended Community-list mode, use this feature.
Z9500
Syntax
ip extcommunity-list word
To exit from this mode, use the exit command.
Parameters
word Enter a community list name (maximum 16 characters).
Defaults none
Command
Modes
CONFIGURATION (conf-ext-community-list)
Border Gateway Protocol
493
