The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
show ip bgp ipv6 unicast filter-list
View the routes that match the filter lists.
Z9500
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show ip bgp ipv6 unicast flap-statistics
View flap statistics on BGP routes.
Z9500
Syntax
show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-
length] [filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the
prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
filter-list as-
path-name
(OPTIONAL) Enter the keywords filter-list followed by
the name of a configured AS-PATH ACL.
regexp regular-
expression
Enter a regular expression then use one or a combination of
the following characters to match:
• . = (period) any single character (including a white
space).
572
Border Gateway Protocol
