Parameters
minutes The range is from 5 to 21600.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
ipv6 dhcp snooping database write-delay
To set time interval for storing the snooping binding entries in a file.
Syntax
[no] ipv6 dhcp snooping database write-delay value
To disable the storing of snooping binding entries in a file, use the no ipv6 dhcp
snooping write-delay command.
Parameters
value The range is from 5 to 21600. The value of the minutes range
is from 5 min. to 15 days.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
Dynamic Host Configuration Protocol (DHCP)
729
