Related
Commands
ftp-server enable — enables FTP server functions on the switch.
ftp-server username — sets a username and password for incoming FTP
connections.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Z9500
Syntax
ftp-server username username password [encryption-type]
password
To delete a user name and its password, use the no ftp-server username
username
command.
Parameters
username Enter a text string up to 40 characters long as the user name.
password
password
Enter the keyword password then a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
encryption-
type
(OPTIONAL) After the keyword password, enter one of the
following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Defaults Not enabled.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Control and Monitoring
111
