Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Introduced
Related
Commands
capture bgp-pdu neighbor — enables capture of an IPv4 BGP neighbor packet.
show capture bgp-pdu neighbor — displays BGP packet capture information for an
IPv6 address on the E-Series.
clear ip bgp
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting
the TCP connection.
Z9500
Syntax
clear ip bgp [vrf vrf-name] [* | <1–4294967295> | <0.1–
65535.65535> | A.B.C.D {soft {in | out}} | X:X:X:X::X {soft {in
| out}} | dampening | flap-statistics | ipv4 | ipv6 | peer-
group]
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to
clear all BGP sessions corresponding to that VRF.
NOTE: Use this attribute to clear a BGP instance
corresponding to either a specific address family in a
default VRF or an IPv4 address family in a a non-default
VRF.
* Enter an asterisk ( * ) to reset all BGP sessions.
<1-429496729
5>
Enter <1-4294967295> to clear peers with the AS number.
<0.1-65535.65
535>
Enter <0.1-65535.65535> to clear peers with the AS number
in dot format.
A.B.C.D Enter the BGP neighbor address in the A.B.C.D format to
clear.
X:X:X:X::X Enter the BGP neighbor address in the X:X:X:X::X format to
clear.
388
Border Gateway Protocol
