ip access-group (ACL VLAN Group)
Apply an egress IP ACL to the ACL VLAN group.
Syntax
ip access-group access-list-name out implicit-permit
Parameters
access-list-
name
Enter the name of the egress IP ACL to be applied to
member interfaces of the VLAN group (140 characters
maximum).
out Enter the keyword out to apply the ACL to outgoing traffic.
implicit-permit
Enter the keyword implicit-permit to change the default
action of the ACL from implicit-deny to implicit-permit (that
is, if the traffic does not match the filters in the ACL, the
traffic is permitted instead of dropped).
Default None
Command
Modes
ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command
History
Version Description
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage
Information
You can apply only an egress IP ACL on an ACL VLAN group.
member vlan (ACL VLAN Group)
Add VLAN members to an ACL VLAN group.
Syntax
member vlan {VLAN-range}
Parameters
VLAN-range
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Default None
266
Access Control Lists (ACL)
