Filter
Top Products
All hinges are factory attached at the top of each
section (except the top section). See illustrations
to the right.
NOTE: The side view illustration shows the roller
carrier profile at the top of each section, and
can be used in conjunction with identifying each
section.
The BOTTOM SECTION can be identified by the
bottom astragal and bottom bracket warning
labels.
The LOCK SECTION can be identified by the lock
stile /or side view.
The INTERMEDIATE I SECTION can be identified
by the warning label on either the right or left
hand side of the section /or side view.
The INTERMEDIATE II SECTION can be identified
by the side view (Used ONLY with 5 section
doors).
The TOP SECTION can be identified by no pre-
installed end or center hinges, and a factory
attached operator stile.
Door Section Identification
TOP SECTION
INTERMEDIATE I SECTION
LOCK SECTION
BOTTOM SECTION
ASTRAGAL
BOTTOM BRACKET
WARNING LABELS
WARNING LABEL
OPERATOR STILE
INTERMEDIATE II SECTION (8”-5 SECTION DOOR ONLY)
LOCK STILE
SIDE VIEW
SIDE VIEW
SIDE VIEW
1 7/8”
2”
1 7/8”
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
SIDE VIEW