Filter
Top Products
Tools Needed:
12
Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Stacking Sections
NOTE: For door section identification see page 4.
NOTE: Make sure hinge leafs are flipped down,
when stacking another section on top.
NOTE: When securing hinge leaf to the section,
install the uppermost fastener first.
With assistance, lift second section and guide
rollers into the vertical tracks. Keep sections
aligned and fasten center hinges first, end hinges
last, to connect the sections using (2) 1/4” -14
x 5/8” self tapping screws. Repeat for other
section(s) except top section.
IMPORTANT: PUSH & HOLD THE
HINGE LEAFS AGAINST SECTION
WHILE SECURING WITH (2) 1/4” -14
x 5/8” SELF TAPPING SCREWS. END
AND INTERMEDIATE HINGES HAVE (2)
SCREWS.
NOTE: Install lock at this time (sold separately)
see Side Lock installation instructions on page 25.
8
Power Drill
7/16” Socket Driver
9
Top Bracket Slide
To install the top bracket slide, align the slots in
the top bracket slide with the set of holes under
the top sections u-bar.
Loosely fasten the top bracket slide using (2) 1/4”
- 20 x 1” carriage bolts and (2) 1/4” - 20 Nylock
nuts to the u-bar. The top bracket slide will be
adjusted and tightened in Step 13.
Insert rollers into top bracket slide.
Repeat for other side.
TOP BRACKET
SLIDE
(2) 1/4” - 20 x 1” carriage
bolts
None
HOLES
TOP SECTION
U-BAR
(2) 1/4”-20
NYLOCK
HEX NUTS
ROLLER
END HINGES
INTERMEDIATE HINGES
LOCK
SECTION
UPPERMOST
HOLE
(2)1/4” - 14 X 5/8”
SELF TAPPING SCREWS
1/4” - 14 X 5/8”
SELF TAPPING SCREWS
UPPERMOST
HOLE
HINGE
LEAF
HINGE
LEAF