Filter
Top Products
Chapter 3 Error Messages 39
unable to obtain unique set id for
<shost>:<svol>
RM Lookup of the set ID in the configuration database for
this set has failed.
Unable to open bitmap file <vol>
RM The volume specified for the bitmap could not be
opened. The volume might not exist or is already in
use by another program.
Unable to open %s:%s
Kernel The data volume for the set on the local host cannot be
opened by the remote mirror software, for one of the
following reasons:
• The volume requested does not exist or is
inaccessible.
• The volume is already in use as a remote mirror or
point-in-time copy bitmap.
Unable to parse config file
PITC iiadm attempted to access the configuration file
dscfg, but could not do so. This indicates a problem
with the configuration, and might require either
restoring the configuration file or reinstalling the Sun
StorEdge Availability Suite software.
Unable to read the bitmap file,
read returned <X> instead of <Y>
RM Bitmap could not be read correctly.
Unable to register %s
Kernel The remote mirror software could not use the volume
requested. Verify that the volume exists, is accessible,
and is not in an error state.
unable to remove "<set>" from
configuration storage: <error>
RM An error has occurred that prevents the remote mirror
software from removing the set from the configuration
database.
Unable to set locking on the
configuration
PITC iiadm needs to lock the configuration file for reading
or writing, but was unable to do so.
unable to store unique set id for
<shost>:<svol>
RM The set ID for the set being enabled could not be
added to the configuration database.
unable to update autosync value in
config for SNDR set <shost>:<svol>
RM Autosync could not be turned on for the remote mirror
set in the configuration database because of an error
writing to the configuration database.
Unexpected return from
check_cluster()
PITC File a bug for iiadm.
TABLE 3-1 Error Messages for the Sun StorEdge Availability Suite 3.2 Software (Continued)
Error Message From Meaning