Sun Microsystems 3.2 Water System User Manual


 
32 Sun StorEdge Availability Suite 3.2 Software Troubleshooting Guide December 2003
Memory allocation failure
PITC iiadm ran out of memory.
Must be super-user to execute
Kernel The user issued a remote mirror command but does
not have superuser privileges. All remote mirror
commands require superuser privileges.
must specify full set details for
enable command
RM The user attempted to enable a set using the shost:svol
format. All parameters for a set must be specified.
no matching SNDR sets found in
config
RM The set specified for the command cannot be found in
the current configuration. Check the set to ensure that
it matches one of the configured sets. Use sndradm -
i to view the sets configured sets.
Not a compact dependent shadow
PITC The user attempted to attach an overflow volume to a
set that is not a compact dependent set. Possible errors:
EFAULT: The kernel module tried to read out-of-
bounds. File a bug against iiadm
ENOMEM: The kernel module ran out of memory.
DSW_EEMPTY: No volume name was specified.
DSW_ENOTFOUND: The set could not be found in the
kernel.
Not all Instant Image volumes are
in a disk group
PITC All volumes (master, shadow, and bitmap) must be in
the same cluster device group.
not a valid number, nust be a
decimal between 1 and <max>
RM The number entered is out of the allowed range or is
not a number.
Not primary, cannot sync %s:%s and
%s:%s
Kernel An update, full sync, or reverse sync command was
issued on the secondary host. These command can be
issued only on the primary host. Log in to the primary
host and issue the request.
NULL struct knetconfig passed down
from user program
Kernel The remote mirror software could not get network
information for the remote mirror set.
NULL struct netbuf passed down
from user program for %s
Kernel The remote mirror software could not get network
information for the remote mirror set.
Operation not possible, disk queue
%s is not empty.
Kernel Disk queue was not empty when the current operation
was attempted. This usually occurs when the user
attempts to disable.
Out of memory
PITC iiadm ran out of memory.
Out of memory creating lookup table
PITC iiadm ran out of memory.
TABLE 3-1 Error Messages for the Sun StorEdge Availability Suite 3.2 Software (Continued)
Error Message From Meaning