Filter
Top Products
20 Sun StorEdge Availability Suite 3.2 Software Troubleshooting Guide • December 2003
Abort failed
PITC iiadm could not abort a copy or update operation on a
set. Possible errors:
EFAULT: The kernel module tried to read out-of-
bounds. File a bug against iiadm.
ENOMEM: The kernel module ran out of memory.
DSW_EEMPTY: No set was specified.
DSW_ENOTFOUND: The specified set does not exist.
Allocation of bitmap device %s
failed
Kernel Remote mirror could not use the bitmap requested to
enable or resume a remote mirror set. This could
happen for one of these reasons:
• The bitmap is notaccessible. Verify that the specified
bitmap volume exists and is accessible.
• The volume requested for use as the bitmap is
already in use. Verify that the volume is not already
in use as a remote mirror data volume or bitmap
volume, or as a point-in-time copy master volume,
shadow volume, or bitmap volume.
Attach failed
PITC The overflow volume could not be attached to the
specified set. Possible errors:
ENOMEM: The kernel module ran out of memory.
DSW_EEMPTY: No overflow volume was specified.
DSW_EINUSE: The overflow volume is already being
used by point-in-time copy software in a different
capacity (master, shadow, bitmap).
DSW_ENOTFOUND: The set that the user is trying to
attach to does not exist.
DSW_EALREADY: The set already has an overflow
volume attached.
DSW_EWRONGTYPE: The set is not compact-dependent.
DSW_ERSRVFAIL: The kernel module could not get
access to the overflow volume.
DSW_EHDRBMP: The set's bitmap could not be read.
Bad host specified
Bad set specified
RM A remote mirror command was issued referring to a
set in abbreviated format, but a mistake was made. The
format did not specify the set in the format: shost:svol.
Bitmap in use
PITC The volume that was specified as the bitmap volume
during an enable operation is already being used by
another set.
TABLE 3-1 Error Messages for the Sun StorEdge Availability Suite 3.2 Software (Continued)
Error Message From Meaning