Filter
Top Products
39
■ With/without entries
A maximum of 10 tied PLUs of the Combo PLU can be modified (added or deleted) temporarily by using
W
and
w
keys.
With: To add a PLU to the combo PLU/EAN.
Without: To delete a linked PLU from the combo PLU/EAN.
The “with” and “without” operation is allowed a total of 20 times.
■ PLU level shift (for direct PLUs)
This shift can double or triple the number of direct PLUs on your POS terminal without adding additional
direct PLU keys. You can use direct PLUs in three levels by utilizing the PLU level shift number key,
ä
or
the PLU level shift keys
⁄
thru
‹
.
Level key shifts the PLU level from the other two to the required level. (The normal level is the level 1.)
You must program your machine in the PGM mode to select one of the two PLU level shift modes —
automatic return mode* and lock shift mode** — and decide whether to allow PLU level shift in both the
REG and MGR modes or in the MGR mode alone.
* The automatic return mode automatically shifts the PLU level back to level 1 after pressing a direct PLU
key or finalizing each transaction.
** The lock shift mode holds the current PLU level until depression of a PLU level shift key.
W
17
U
w
16
U
12
U
c
PrintKey operation
Example
NOTE
Direct PLU
Direct PLU
PLU code
to be added
(To be added)
(To be deleted)
With:
Without:
w
W
U
Ä
U
U
Direct PLU
Tied PLU code
to be deleted
U
To enter the next PLU code to be added
To enter the next PLU code to be deleted
Combo PLU code
Combo EAN code
Scan Combo EAN code
(Combo PLU)
Procedure