Filter
Top Products
105
Non-accessed EAN and
Customer Deletion
You can delete EANs and customers that had not been accessed for a certain period. You can
program a period in the PGM2 mode. As for customer, you can also delete customers with
regardless to a non-accessed period.
Follow the procedure shown below.
Non-accessed EAN deletion
1. Move the mode key to X1/Z1 position.
2. Select “7 EAN DELETE”.
3. Select “1 READING” to take a report, or “2 DELETE” to delete non-accessed EANs.
4. When you select “2 DELETE”, select you want to delete all the non-accessed EANs (1 ALL
DELETE) or delete the non-accessed EANs individually (2 IND.DELETE).
It is recommended to take a report first before executing deleting operation.
Non-accessed customer deletion
1. Move the mode key to X2/Z2 position.
2. Select “6 NO ACCESS CUSTOM”.
3. Select “1 READING” to take a report, or “2 DELETE” to delete non-accessed customers.
4. When you select “2 DELETE”, select you want to delete all the non-accessed customers (1 ALL
DELETE) or delete the non-accessed customers individually (2 IND.DELETE).
It is recommended to take a report first before executing deleting operation.
Customer deletion
1. Move the mode key to X2/Z2 position.
2. Select “7 CUSTOM DELETE”.
3. Specify the range (start/end customer codes) you want to delete.
NOTE
NOTE
X1/Z1 MODE
X2/Z2 MODE
9