Filter
Top Products
166
Backup Data Send Programming
Use the following procedure to select the menu option “16 BACKUP SEND”:
■ Backup data send
Your POS terminal can send data to another device by RS232 (channel 2).
Program each item as follows:
• SEND DATA (Use the selective entry)
Select one of the following options (data sources):
ALL RAM
SSP
• SPEED (Use the selective entry)
Select one of the following options (data transmission speeds):
PROGRAMMED SPEED: Sends data at a programmed speed.
115200bps: Sends data at 115200 bps.
57600bps: Sends data at 57600 bps.
38400bps: Sends data at 38400 bps.
19200bps: Sends data at 19200 bps.
9600bps: Sends data at 9600 bps.
4800bps: Sends data at 4800 bps.
2400bps: Sends data at 2400 bps.
Procedure
▼
Procedure
▼
Backup Data Receive Programming
Use the following procedure to select the menu option “17 BACKUP RECEIVE”:
■ Backup data receive
Your POS terminal can receive data from another device by RS232 (channel 2).
Program each item as follows:
• SPEED (Use the selective entry)
Select one of the following options(data transmission speeds):
PROGRAMMED SPEED: Receives data at a programmed speed.
115200bps: Receives data at 115200 bps.
57600bps: Receives data at 57600 bps.
38400bps: Receives data at 38400 bps.
19200bps: Receives data at 19200 bps.
9600bps: Receives data at 9600 bps.
4800bps: Receives data at 4800 bps.
2400bps: Receives data at 2400 bps.