Filter
Top Products
116
■
Department (continued)
• TAXABLE 1 through 6 (Use the selective entry)
Tax status
YES: Taxable
NO : Non-taxable
• The tax system of your POS terminal has been factory-set to automatic VAT1 - 6. If you desire
to select any of automatic tax 1 - 6, manual VAT1 - 6, manual VAT1, manual tax 1 - 6, and the
combination of the automatic VAT 1 - 3 and the automatic tax 4 - 6, contact your authorized
SHARP dealer.
• When the combination of the automatic VAT1 - 3 and automatic tax 4 - 6 system is selected,
one of the taxable 1 - 3 can be selected in combination with taxable 4 - 6.
• HALO (Use the numeric entry)
• You can set an upper limit amount (HALO) for each department. The limit is effective for the REG-
mode operations and can be overridden in the MGR mode.
• AB is the same as A x 10
B
A: Significant digit for HALO (1 through 9)
B: Number of zeros to follow the significant digit for HALO (0 through 8)
• COMMIS. No. (Use the numeric entry)
Commission group number (1 through 9)
If the number “0” is entered, no commission group number will be assigned to a department.
You can assign each department to a commission group.
• OUTPUT KP No. 1 and No. 2 (Use the numeric entry)
ID number of the network remote printer 1 or 2 (1 through 9)
If the number “0” is entered, no remote printer will operate.
• RECEIPT PRINT (Use the selective entry)
YES: Prints the department sales information on the receipt.
NO: Prints nothing on the receipt.
• PRNT ON CLK (Use the selective entry)
YES: Prints the department sales information on the clerk report.
NO: Prints nothing on the clerk report.
• VMP No. (Use the numeric entry)
VMP file number for EAN (1 through 3).
If the number “0” is entered, no VMP file number is assigned.
NOTE