Filter
Top Products
120
■ PLU/EAN stock
You can assign a stock quantity to each PLU/EAN code.
Shown below is an example of selecting “1 OVER WRITE.”
After selecting “1 OVER WRITE,” select a pertinent PLU/EAN code. Then
the next screen will appear to show the following items:
• CURRENT ST
The current stock is displayed.
• NEW STOCK (Use the numeric entry)
Enter a new stock quantity (max. 7 digits: 1 to 9999.999(9999999))
• If you need to add or subtract a stock quantity to or from the current stock
quantity, select “2 ADD” or “3 SUB” and enter a value to be added or
subtracted.
• You cannot enter any values for the item marked with “!”.
• The entry of a new stock value will update to the PLU/EAN stock counter.
NOTE
The screen continues in
the same format as those
screens shown in section
“PLU/EAN”.
■ PLU range
You can make a recipe table which contains up to ten ingredients.
Enter a value or select an option for each item as follows:
• START (Use the numeric entry)
Starting PLU code (max. 5 digits)
• END (Use the numeric entry)
Ending PLU code (max. 5 digits)
• OPERATION (Use the selective entry)
MAINTE.: Enables you to change the setting you have
programmed.
NEW&MAINTE.: Enables you to change the current setting when the
specified codes have already been created or to
create new codes when the specified codes have not
been created yet.
DELETE: Enables you to delete a specified range of PLUs.
Procedure
Select a pertinent PLU
code, or directly enter a
PLU code or EAN code.
▼
Procedure
▼
▼