Filter
Top Products
185
■ Add-on code
UPC-A and EAN-13 may be followed by a two digits number or a five digits number as add-on code,
excepting UPC-A without a check digit plus two or five digits add-on code.
Therefore, the total number of digits enterable for sales entries are as shown below:
Your register automatically judges the add-on code in an EAN code entered from the total
number of digits and the flag.
■ EAN file
Your POS terminal has an EAN main file and can provide a Dynamic EAN (D-EAN) file.
EAN main file
In general use, all EAN items are managed in the EAN main file.
The programming data and sales information is recorded in the EAN main file.
Dynamic EAN file
If an dynamic EAN file is allocated, the items entered by EAN learning function (refer to “EAN learning
function” section.) are saved in this file temporarily. (If not generated, they are directly saved in the EAN
main file.) The data saved temporarily can be transferred to the EAN main file when necessary by
executing D-EAN LOAD in the PGM2 mode.
If you want to use the dynamic EAN file, consult your authorized SHARP dealer.
NOTE
Code entry No add-on code 2-digit add-on code 5-digit add-on code
UPC-A 12 14 17
UPC-A w/leading zero 13 15 18
UPC-A w/o check digit 11 ––
UPC-E 6 ––
EAN-8 8 ––
EAN-13 13 15 18