Filter
Top Products
128
Select a pertinent key no.
from the key numbers list,
or directly press the key
on the keyboard.
In the case of selecting “069 DIRECT PLU”
• TYPE (Use the selective entry)
PLU: Assigns the key as a direct PLU key.
DEPT: Assigns the key as a direct department key.
When selecting a department, the screen on which a department code is to
be entered (the message “DEPT. CODE”) will appear.
• LEVEL1 through 3 (Use the numeric entry)
Enter a PLU code for each level. For example, if you want to use this
key as PLU code 1 (level 1) and PLU code 101 (level 2), enter 1 for
“LEVEL1” and 101 for “LEVEL2.”
Key numbers
NOTE
Procedure
▼
▼
▼
Direct Key Programming
Use the following procedure to select direct-key programming:
■ Direct key
You can assign departments and PLUs directly to the keyboard. In the case of PLUs, you may assign up to
3 levels to be accessed directly on the keyboard. For key no. positions, refer to the illustration shown below.
You can also select a key by directly pressing the corresponding direct key assigned on the keyboard.
51
50
49
48
47
57
56
55
54
53
63
62
61
60
59
69
68
67
66
65
Departments and PLUs programmable area
• You can assign departments and PLUs only the “Departments and PLUs
programmable area” shown above.
• You cannot assign a department or a PLU to the position to which a
function key has been assigned.
NOTE