Filter
Top Products
12
Keys and Switches
■ Mode switch and mode keys
The mode switch can be operated by inserting one of the three supplied mode keys - manager (MA),
submanager (SM), and operator (OP) keys. These keys can be inserted or removed only when the switch is
in the “REG” or “ ” position.
The mode switch has these settings:
: This mode locks all register operations.
No change occurs to register data.
OP X/Z: This setting allows cashiers/clerks to take X or Z reports for their
sales information. (This setting may be used only when your
register has been programmed for “OP X/Z mode available” in
the PGM2 mode.)
REG: For entering sales
PGM1: To program those items that need to be changed often: e.g., unit prices of departments, PLUs or
EANs, and percentages
PGM2: To program all PGM1 items and those items that do not require frequent changes: e.g., date,
time, or a variety of register functions
MGR: For manager's and submanager's entries
The manager can use this mode to make entries that are not permitted to be made by cashiers -
for example, after-transaction voiding and override entry.
X1/Z1: To take the X/Z report for various daily totals
X2/Z2: To take the X/Z report for various periodic (weekly or monthly) consolidation
■ Drawer lock key
This key locks and unlocks the drawer. To lock it, turn 90 degrees
counterclockwise. To unlock it, turn 90 degrees clockwise.
(In case your POS terminal has not the drawer supplied by SHARP, this
key is not supplied.)
■ Printer cover lock key
This key locks and unlocks the printer cover. To lock it, turn 90 degrees
counterclockwise. To unlock, turn 90 degrees clockwise.
REG
OP
X / Z
MGR
X1/Z1
X2/Z2
PGM1
PGM2
O
P
M
A
S
M
Operative range
MA
SM OP
• Manager key (MA)
• Submanager key (SM)
• Operator key (OP)
SK1-1