Filter
Top Products
Convector 460/560PTR - 53 - ©Rinnai
15.Removal of the Spark Electrode
CAUTION
240 Volt exposure. Isolate the electrical supply to
the appliance and reconfirm with the neon
screwdriver or multimeter.
a. Follow section 3 (Removal of the Front
Panel).
b. Follow section 14 (Removal of the Combus-
tion Chamber.)
c. Remove two (2) screws to remove the elec-
trode bracket.
16.Removal of the Main Burner
CAUTION
240 Volt exposure. Isolate the electrical supply to
the appliance and reconfirm with the neon
screwdriver or multimeter.
a. Follow section 3 (Removal of the Front
Panel).
b. Follow section 14 (Removal of the Combus-
tion Chamber.).
c. Remove the spark electrode (Follow section
15).
d. Follow section 8 c (Removal of the Overheat
Switch).
e. Remove one (1) screw from the locating
bracket (top).
f. Lift and remove locating bracket.
g. Remove one (1) screw from the other end of
the combustion chamber (middle).
h. Remove thermocouple assy (follow section
9).
i. Lift top tab to release the burner and pull out
of combustion chamber in the direction of
the gas supply tube.
j. Remove the six (6) screws to remove the
burner cover shield.