Filter
Top Products
Convector RCE470/670TRE
ISO 9001 Model for Quality Assurance in design/development, production, installation and servicing,
aimed primarily at achieving customer satisfaction by preventing nonconformity at all stages
from design through to servicing.
ISO 9002 Same as ISO 9001 but excluding design.
AG 103 Approval requirements for gas heaters as set by The Australian Gas Association and Australian
Liquefied Petroleum Gas Association Ltd, to ensure proper safety performance and quality levels
are achieved.
Proudly a member of The Australian Gas Association.
All of our products are AGA tested and approved.
Distributed and serviced in Australia under a
Quality System certified as complying with ISO
9002 by Quality Assurance Services.
Rinnai New Zealand has been certified to ISO 9001
Quality Assurance by Telarc.
Comparative Energy Consumption tested to The
Australian Gas Association requirements of
Australian Gas Code AG 103. An energy rating of
5 stars refers to an efficiency of approximately 80%,
that is, 80% of gas consumed is converted to useful
heat.
The Regulatory Compliance Mark (RCM)
indicates compliance with electrical safety
regulations in Australia and New Zealand
Rinnai Australia Supplier Code 5109