Filter
Top Products
Convector 460/560PTR - 18 - ©Rinnai
Automatic Air Purifier Operation
1. Turning ON
i) Press the “Air Purif” button. The Fan Speed “Auto” indicator will illuminate and the Air Purifier
fan will rotate on High. The Dust Indicator will illuminate green.
ii) After approximately 20 seconds, the fan speed will adjust automatically according to the
cleanliness of the air. (The Air Purifier fan will operate at levels High, Med, and Low.) The 3 dust
indicators will illuminate according to the degree of uncleanliness of the air in a room. (Red =
Exceedingly High, Orange = High, Green = Low.)
2. Adjusting the Fan Speed
i) Adjust to the desired Fan Speed with the Fan Speed button.
3. Turning OFF.
i) Press the “Air Purif” button.
ii) The Air Purifier Fan will stop.
iii) The Fan Speed changeover indicator and Dust Indicator will go out.
OFF Timer (Air Purifier)
• Press the OFF Timer button when the Air Purifier is operating and set the desired time (1, 2, or 4
hours).
• The Air Purifier will turn off after the set time period is lapsed.
Filter Replacement Indicator
When the air purifier has operated for 4000 hours, the filter replacement indicator (Purif Filter Chg)
will illuminate to let you know that the filter needs to be replaced. The operation time is calculated
as follows:
Air Cleaning Operation Time = 1/2 (Hours of automatic operation) + Hours of manual operation
The Reset Button
- the filter replacement indicator must be reset by doing the following:
• When the “Purif Filter Chg” indicator is illuminated:
Press the reset button continuously for approximately 3 seconds to make the indicator go out and
to reset the hours of air purifier operation.
• When the “Purif Filter Chg” indicator is out:
Press the reset button continuously for approximately 3 seconds to illuminate the indicator
momentarily (for 0.5 sec) and to reset the hours of air purifier operation.