Filter
Top Products
C540M-C (10/05) 45
VIDEO LOSS
The video loss function allows you to disable a camera that has malfunctioned.
1. Select from the Main Menu.
2. Select . The Video Loss Menu appears on the LCD display.
Figure 72. Video Loss Menu
3. Enter the camera number and select .
4. Select to disable the camera.
NOTE: To enable the camera, select . means that the camera is disabled.
ALARMS
Alarms can be armed or disarmed from the CM9760-KBD. You must arm an alarm if you want to be notified that it has triggered. Alarms have to
be rearmed if the keyboard is turned off. Macros are normally used to arm alarms.
ARMING ALARMS
A list of the logical alarm numbers should be available from your manager or security supervisor. To arm an alarm:
1. From the Main Menu, enter the logical number of the required alarm and select . The Alarm Menu appears on the LCD display.
Figure 73 shows alarm number 1.
Figure 73. Alarm Menu
NOTE: “Alarm denied” appears if access to the alarm has been denied to the user and “Alarm not present” appears if the alarm has not been
programmed into the system.
2. Select . The icon darkens meaning that the alarm is armed. You will be notified if it is triggered.
VIDEO
LOSS
DEF
1
11
ARM
DIS’
1
11