Filter
Top Products
16 C540M-C (10/05)
CALIBRATING THE JOYSTICK AUTOMATICALLY
This is the factory default calibration mode for all CM9760-KBD keyboards. Follow these steps if you change the joystick calibration mode to
manual and want to go back to automatic joystick calibration.
1. Select from the Setup Mode menu.
2. With the joystick in the center, select and then to activate automatic calibration mode.
3. Select .
The joystick calibrates automatically every 30 minutes with no additional user action required.
ADJUSTING THE DISPLAY BRIGHTNESS
1. Select from the Setup Mode Menu. The LCD Brightness Setup Menu appears on the LCD display.
Figure 10.
LCD Brightness Setup Menu
2. Select or to adjust the display brightness.
3. Select and then .
NOTE:
The display brightness can also be adjusted by selecting from the Define Menu.
LCD BRIGHTNESS SETUP
SAVE