Filter
Top Products
34 C540M-C (10/05)
RECALLING A PATTERN
1. Select from the Main Menu. The Preset Menu appears on the LCD display.
Figure 52. Preset Menu
2. Select .
NOTE: If you create two patterns within a time-out period, enter 1 and then select to run the first pattern. After you stop the first
pattern, enter 2 and then select to run the second pattern.
ZONES
A zone is a user-defined space to which a label is attached and a camera is associated. The camera used at the time the zone boundaries are
defined is associated with the zone. The zone label appears on the selected monitor after zone definition if you move the camera within the
defined zone. You can define and associate up to eight zones with the same camera. A priority level (1-8, with 8 being the highest) is assigned to
each zone.
CREATING A ZONE
1. Move the joystick to the point where you want zone definition to begin. Always move the joystick so that camera movement is from the left
to the right.
2. Select from the Main Menu. The Define Menu appears on the LCD display.
Figure 53. Define Menu
3. Select . The Define Zone Menu appears on the LCD display.
Figure 54. Define Zone Menu
Ptz
PRST
PRST
221
Ptz
DEF
PRST
M
O
R
E
VIDEO
LOSS
221
DEF
M
O
R
E
Ptz
221