Filter
Top Products
C540M-C (10/05) 17
DIRECT CAMERA CONTROL
Cameras can be connected directly to COM 1 and/or COM 2 located on the bottom of the CM9760-KBD. Up to 16 cameras can be connected to
each port for a total of 32. Follow these steps and refer to Figure 11.
NOTE:
Use cameras that have RS-422 Pelco P-type protocol. This includes most Legacy
®
, Intercept
®
, and System 9750/9760 ERD receivers.
Figure 11.
Direct Mode Connection
1. Select from the Setup Mode Menu. The Advance Setup 1 Menu appears on the LCD display. The cursor is on the Host row.
Figure 12.
Advance Setup 1 Menu
2. Select or to choose Direct Cam Ctrl.
Figure 13.
Direct Camera Control
COM 2 COM 1
PELCO CM9760-KBD
DIRECT MODE HOOKUP
RECEIVER
RECEIVER
RECEIVER
RECEIVER
RECEIVER
RECEIVER
UP TO 16 RECEIVERS
AND ASSOCIATED
CAMERA INPUTS
UP TO 16 RECEIVERS
AND ASSOCIATED
CAMERA INPUTS
POWER
SUPPLY
PIN 1 TX +
PIN 2 TX -
PIN 1 TX +
PIN 2 TX -
Advance Setup 1
Host
COM 1
COM 2
COM 3
>
Even (Host)
Even
Even
System 9750/60
4800
4800
4800
SAVE
Advance Setup 1
Host
COM 1
COM 2
COM 3
>
Even
Even
Even
Direct Cam Ctrl
4800
4800
4800
SAVE