Filter
Top Products
28 C540M-C (10/05)
You can also select a monitor if you have assigned the Enter function to one of the control keys. Press , enter a monitor number, and then
press the control key that has been assigned the Enter function.
SELECTING CAMERAS
1. Enter a camera number from the Main Menu. For example, enter camera 2. If you enter a camera number that does not exist, “Cam Not
Present” appears on the LCD display.
Figure 43. Main Menu Camera Selection
2. Select or press . The Camera Menu appears on the LCD display.
Figure 44. Camera Menu
3. Select or to go through the available cameras.
You can also select a camera if you have assigned the Enter function to one of the control keys. Press , enter a camera number, and then
press the control key that has been assigned the Enter function.
NOTE: When going through the available cameras, you may see a camera input that has been defined as a multiplexer,VCR, or DVR. The control
icons for those devices will appear on the LCD display. You must press or to get back to or . Refer to the
CM9700-MGR Software Guide for information on how to add those devices.
MON
11
2
PRST
MACDEF GPI
LOG
OFF
CAM
21
OVER
RIDE
CAM
Fwd Bwd