Filter
Top Products
91
Settings
2. Input/output signal settings
Use [F4] to select the scaling method using the Scale
item.
Fit-V The aspect ratio of the output images is
maintained, and the size of the images is
increased or reduced in accordance with the
vertical resolution.
(Black bands are inserted into the areas
where there are no images. The protruding
parts of the images are cropped.)
Fit-H The aspect ratio of the output images is
maintained, and the size of the images is
increased or reduced in accordance with the
horizontal resolution.
(Black bands are inserted into the areas
where there are no images. The protruding
parts of the images are cropped.)
Full The size of the output images is increased
or reduced in accordance with the system
resolution.
Fullx80% The size of the output image is increased or
reduced in accordance with the 80 % size of
the system resolution.
Fullx90% The size of the output image is increased or
reduced in accordance with the 90 % size of
the system resolution.
The aspect ratio is not maintained at the Full,
Fullx80% or Fullx90% setting.
The rate at which the image size is increased or
reduced in the vertical direction and in the horizontal
direction differs.
Setting the video movement detection sensitivity
Use [F1] to display the Assign sub menu.
Use [F3] to set the image movement detection
sensitivity using the Move Detect item.
1 Toward still images
3 Standard
5 Toward moving images