Filter
Top Products
130
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Use [F1] to select. Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Input Input
Parameter
Select ()
Setting range
SDI IN1 to 8,
DVI IN,
IN-A1, IN-A2,
IN-B1, IN-B2
Default value
SDI IN1
Input (SDI)
/ X ()
SDI IN1 to SDI IN8,
IN A1, IN A2, IN B1
or IN B2 is displayed
in the X part.
The material name
(up to 10 characters)
is displayed in the
part.
FS
Parameter
FS Mode Delay
Setting range
On, Off Normal,
Dot by Dot,
Up Convert,
Auto
(Only SDI IN5
to SDI IN8 are
covered by the
“Up Convert” and
“Auto” modes.)
0 to 8f
(Only SDI IN7
and SDI IN8 are
involved here.)
Default value
On
SDI IN1 to
SDI IN4:
Normal
SDI IN5 to
SDI IN8:
Auto
0f
Freeze
Parameter
Select Freeze
Setting range
Frame, Field On, Off
Default value
Frame Off
Name
Parameter
Type Name
Setting range
Default, User
Default value
Default
Up Converter1
Parameter
Scale Move Detect Sharp Size
(SDI IN5 to
SDI IN8, IN A1,
IN A2, IN B1, and
IN B2 only)
Setting range
Squeeze,
Edge Crop,
Letter Box
1 to 51 to 5 100 to 110
Default value
Squeeze 3 3 100
Up Converter2
Parameter
Edge Crop Pos Limiter
(SDI IN5 to
SDI IN8, IN A1,
IN A2, IN B1, and
IN B2 only)
Setting range
Center, Right,
Left
Off, 108, 104,
100
(Only IN A1,
IN A2, IN B1 and
IN B2 are involved
here.)
Default value
Center
Off
Video Process1
Parameter
Video Process Y-Gain Pedestal
Setting range
On, Off 0.0 to 200.0 20.0 to 20.0
Default value
Off
100.0 0.0
Video Process2
Parameter
C-Gain Hue
Copy From ()
Setting range
0.0 to 200.0 0.0 to 359.9 SDI IN1 to
SDI IN8
Default value
100.0 0.0
Default values
vary depending
on the selections
of the Select
items in the Input
submenu.
5. Setting menu table
: When the Select item is SDI IN1: SDI IN2
When the Select item is other than SDI IN1: SDI IN1