Filter
Top Products
79
Settings
2. Input/output signal settings
2-1-6. Setting the up-converter
Select the settings for SDI IN5 to SDI IN8, as well as for the
up-converter that is built into the option boards listed below:
AV-HS04M1 (SDI Input Board)
AV-HS04M2 (Analog Input Board)
AV-HS04M6 (Analog Composite Input Board)
On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the Up Converter1 sub menu.
Use [F2] to select the scaling system using the Scale
item.
Squeeze The image is enlarged both horizontally and
vertically to fi ll the entire screen.
Edge Crop The aspect ratio of the image is maintained,
the image size is increased in accordance
with the vertical resolution, and black bands
are added at the left and right.
Letter Box The aspect ratio of the image is maintained,
the image size is increased in accordance
with the horizontal resolution, and the image
is cropped at the top and bottom.
Input image Squeeze
Edge Crop Letter Box
Use [F3] to set the image movement detection
sensitivity using the Move Detect item.
1 Toward still images
3 Standard
5 Toward moving images
Use [F4] to set the extent of the edge sharpness for the
images using the Sharp item.
1 Not sharp edges
3 Standard
5 Very sharp edges
Use [F5] to adjust the input image size (100 % to
110 %).
Fine-tuning of image positions
Fine-tuning of image positions is performed when “Edge
Crop” is selected for the scaling method.
Use [F1] to display the Up Converter2 sub menu.
Use [F2] to select the image position using the Edge
Crop Pos item.
Center The image is positioned at the center, and
black images are added at the left and right.
Right The image is positioned at the right, and a
black image is added at the left.
Left The image is positioned at the left, and a
black image is added at the right.
Setting the gamut limiter
On the Up Converter2 sub menu, use [F4] to set the
color range of the input signals using the Limiter item.
Off The color range is not restricted.
108 The amplitude level of the colors (R, G and
B) is restricted to 0 % - 108 %.
104 The amplitude level of the colors (R, G and
B) is restricted to 0 % - 104 %.
100 The amplitude level of the colors (R, G and
B) is restricted to 0 % - 100 %.