Filter
Top Products
113
Settings
4. External interfaces
Output from the GPI Output port
Assign Item Description of function assigned Output
CUT Cut transition executed
Low pulses are output
(approx. 50 to 60 ms).
KEY ON Key transition start
DSK ON DSK transition start
PinP1 ON PinP1 transition start
PinP2 ON PinP2 transition start
FTB ON FTB transition start
BKGD CUT Cut transition for the background executed
KEY CUT Cut transition for a key executed
EVENTMEM Event set by event memory executed
AUTO Auto transition execution in progress
A low level is output.
BKGD AUTO Auto transition execution in progress for background
KEY AUTO Auto transition execution in progress for key
KEY Trans Transition execution in progress for key
DSK Trans Transition execution in progress for DSK
PinP1 Trans Transition execution in progress for PinP1
PinP2 Trans Transition execution in progress for PinP2
FTB Trans Transition execution in progress for FTB
REDTly1 to 13
Red tally for INPUT1 to INPUT13
1
A low level is output during tally
output.
GRNTly1 to 13
Green tally for INPUT1 to INPUT13
1
AUXTly1 to 13
When INPUT1 to INPUT13
1
have been selected by the AUX bus
Select the AUX buses (AUX1 to AUX4) whose signals are to be
output using the menu.
A low level is output while the inputs
are selected.
No Assign No function assigned
1: The following inputs are used for INPUT1 to INPUT13.
INPUT1 to INPUT8: SDI IN1 to SDI IN8
INPUT9: DVI IN
INPUT10, INPUT11: IN A1, IN A2
INPUT12, INPUT13: IN B1, IN B2
When a plug-in software application is introduced, the functions inherent to that application are sometimes added as the
functions which are assigned.
2
2: This function can be actuated in any model whose system version is V2.00.00 and up.
These operations cannot be performed in a model with a system version of below V2.00.00.