Filter
Top Products
104
3. System settings
3-2-2. Setting the crosspoint switching
The timing at which the crosspoints are to be switched can be
set.
This switching involves the operations of the crosspoint
buttons and [Cut] button.
Press the x button to light its indicator, and display the
XPT menu.
Use [F1] to display the XPT Switch sub menu.
Use [F2], and select the switching timing using the
Timing item.
Any The crosspoints are switched in the nearest
fi eld. This is suited to live applications.
Field1 The crosspoints are switched in fi eld 1.
This is suited to editing applications.
Field2 The crosspoints are switched in fi eld 2.
This is suited to editing applications.