Filter
Top Products
81
Settings
2. Input/output signal settings
2-1-9. Setting the analog composite input
signals (option)
When the analog composite input board (option) has been
connected, the analog composite input signals can be set.
On the Input sub menu, use [F2] to select the input to
be set using the Select item.
Refer to “2-1. Input signal settings”.
Use [F1] to display the Video Process sub menu.
Use [F2] to set the gain of the input signal (Y signal
gain) using the Gain item.
Use [F3] to adjust the chroma level using the Chroma
item.
(Maximum amount of variation: approx. ±3 dB)
The auto color control function is activated, and the
chroma level is kept at the value that has been set.
Use [F4] to adjust the pedestal level using the Ped item.
(Maximum amount of variation: approx. ±100 mV)
Use [F5] to adjust the hue using the Hue item.
(Maximum amount of variation: approx. ±20°)
Adjustment of Hue is possible when the system format
is 1080/59.94i, 720/59.94p and 480/59.94i.
For details on the other settings, refer to the operating
instructions of the option board.