Filter
Top Products
116
4. External interfaces
4-5. Plug-in software
This unit enables plug-in software to be registered and its
functions to be added.
For detailed information regarding the plug-in software, ask
the dealer from whom you purchased your unit.
Registering a plug-in
The plug-in software can be loaded from an memory card,
and registered in the unit.
Refer to “1-12-3. Loading data from memory cards”.
When the plug-in software is registered, separate menu
operations can be performed.
It is also possible to delete plug-in software which has been
registered.
Opening the separate menu of the plug-in
Press the l button to light its indicator, and display the
Plug-in menu.
Use [F1] to select the plug-in software.
The plug-in name of the plug-in software registered is
displayed on the sub menu.
Press [F2] to open the menu of the plug-in software.
Plug-in startup setting
This setting determines whether the plug-in software is to
be started up when the unit is started up.
On the “plug-in name” sub menu, use [F3] to establish the
setting at startup using the Enable item.
On The plug-in software is started up when the
unit is started up.
Off The plug-in software is not started up when
the unit is started up.
The plug-in startup setting takes effect when the unit is
next started up.
Version information
The plug-in software version is displayed in the Version
item of the “plug-in name” sub menu.
Deleting plug-in software
Press the l button to display the Plug-in menu.
Use [F1] to display the “plug-in name” sub menu whose
plug-in software is to be deleted, and press [F5].
The line of the selected “plug-in name” sub menu
changes to a light gray display (it is grayed out).
The plug-in software in question is deleted when the unit
is next started up.
Plug-in software registration information
If the [MENU MODE] button of the display is pressed
to set the display mode to “Menu display/Subscreen/
Image display” when the Plug-in menu is displayed, the
registration information of the plug-in software applications
is displayed in the form of a list on the built-in display.
The user can verify which plug-in software has been
registered at which number on the Plug-in List.