Filter
Top Products
17
Basic
operations
1. Basic operations
Setting the fill matte color
Press the k button to light its indicator, and display the
Key menu.
Use [F1] to display the Fill Matte sub menu.
Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lum
of the fill matte.
To call the preset color
Use [F5] to select the preset color using the Load item,
and press the [F5].
When [F5] is pressed, what has been set so far is
canceled and replaced with the preset color values.
To save the values that were set before calling the preset
color, refer to “1-10. Memory”.
1-3-3. Key transitions
Select the transition mode.
Press the [KEY] button in the transition area to light its
indicator.
To execute a background transition and key transition
at the same time, press the [BKGD] button and [KEY]
button together to turn on both indicators.
ヤヶヵ
モヶヵヰ
ヮリヹ
ヮリヹ
ヸリヱユ
ワバン
ン
ャレヨュ
レユヺ
レユヺ
ヰワ
ョヵャ
ヰワ
ヱㄊㄏヱヒ
ヰワ
ヱㄊㄏヱビ
ヰワ
ュヴレ
ヰワ
ヸリヱユチュリンユヤヵリヰワ
ヸリヱユ
ヮリヹ
ヸリヱユ
Select the transition type.
Use the [MIX] button or [WIPE] button in the transition
area to select the key transition mode.
The selected button lights in amber, and the MIX or
WIPE status indicator LED depending on the selected
mode lights.
If WIPE has been selected, press the [KEY PATT] button
in the memory/wipe pattern/number key area to light its
indicator, and select the wipe pattern.
フ
リワヴ
ヮユワヶ
リワヱヶヵ
ヷヮユヮ
ャレヨュ
ヱモヵヵ
レユヺ
ヱモヵヵ
ヵモレユ
ユワヵユン
バ
ヌ
ヱモヨユ
ヱロモヺ
ンユヤ
ヴヵヰヱ
ヹヱヵ
ュヴャロ
⿋
ヤロリヱチヒ
ヴヵリロロチヒ
ヮユヮヰンヺチバチヸリヱユチヱモヵヵユンワチバチヒパチレユヺ
⿋⿋
ヵンリヮチヰョョ
⿍⿍
ヤロリヱチビ
ヴヵリロロチビ
ンユヷ
ヵンリヮチヰヶヵ
ヵンリヮチリワ
ペ
ヱモヴヵユ
プ
ヮヰュ
ピ
ンユヷ
ヤ
ヶワュヰ
ベ
ヤヰヱヺ
ブ
ュユロ
ビ
⿍
ハ
⿍⿍
ヘ
ワユヸ
ヒ
⿋
パバヒパ
⿋⿋
⿍
Set the time of the transition.
On the Time menu, use [F1] to display the Key sub
menu.
As with a background transition, set the transition time.