Filter
Top Products
42
1. Basic operations
1-8. Internal color signals
This unit supports two sets of internal color signals.
1-8-1. Setting the color background
The color background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue),
Sat (color saturation) and Lum (luminance) are set, and under
the other the 8 preset colors (white, yellow, cyan, green,
magenta, red, blue and black) are called.
The Hue, Sat and Lum of the called colors can also be
adjusted.
Adjusting the colors
Press the b button to light its indicator, and display the
Color Background menu.
Use [F1] to display the CBGD1 Main sub menu (or
CBGD2 Main sub menu).
Use [F2], [F3] and [F4] to perform the color adjustments
(Hue, Sat and Lum).
To call the preset color
Use [F5] to select the preset color using the Load item,
and press the [F5].
When [F5] is pressed, what has been set so far is
canceled and replaced with the preset color values.
To save the values that were set before calling the preset
color, refer to “1-10. Memory”.
1-8-2. Setting the Wash effect
The gradation effect for color backgrounds can be set.
Selecting the Wash effect and setting the colors
Press the b button to light its indicator, and display the
Color Background menu.
Use [F1] to display the CBGD1 Wash sub menu (or
CBGD2 Wash sub menu).
Use [F2] to set the Wash (gradation) effect using the
Wash item.
On The gradation effect is added.
Off The gradation effect is not added.
Use [F3] to set the color of the Wash (gradation) effect
using the Color item.
Dual A dual-color gradation effect is added.
(This results in a gradation of two colors,
namely, the CBGD1 Main color and the
CBGD1 Sub color.)
Rainbow The rainbow color gradation effect is added.
When “Dual” has been selected, use [F1] to display the
CBGD1 Sub sub menu (or CBGD2 Sub sub menu), and
set the sub color.
Use [F2], [F3] and [F4] to adjust the colors (Hue, Sat
and Lum).