Filter
Top Products
88
2. Input/output signal settings
2-2. Output signal settings
SDI OUT1 to SDI OUT5 are SDI signal outputs.
DVI OUT is DVI-D signal output.
OUT A1, OUT A2, OUT B1 and OUT B2 can be set only when one of the following option boards has been connected.
AV-HS04M4 (Analog Output Board)
AV-HS04M5 (DVI/Analog Output Board)
AV-HS04M7 (SDI Output Board)
Before proceeding to set the output signals, first select the output signals to be set using the Output sub menu.
Press the i button to light its indicator, and display the Output menu.
Use [F1] to display the Output sub menu.
Use [F2] to select the output signals using the Select item.
The menu display is switched depending on the selected output signals.
The menu title is set to “MENU: Output (signal type)/output connector”.
Signal type SDI, Analog, DVI-D, DVI-I
<Example of menu (SDI)>
<List of settings by output signal>
Output connector
Setting menu and numbers of sections in this manual
Assign SDI Output
DVI Output
(Digital)
DVI Output
(Analog)
Down
Converter
2-2-1 2-2-2 2-2-3 2-2-3 2-2-4
SDI OUT1 to
SDI OUT5
Standard
SDI output 5 lines
———
DVI OUT
Standard
DVI-D output 1 line
—
——
Option slot
OUT A1,
OUT A2,
AV-HS04M4
Analog component output 2 lines
————
AV-HS04M5
DVI-I output 1 line
Analog component output 1 line
——
—
AV-HS04M7
SDI output 2 lines
——
Option slot
OUT B1,
OUT B2
AV-HS04M4
Analog component output 2 lines
————
AV-HS04M5
DVI-I output 1 line
Analog component output 1 line
——
—
AV-HS04M7
SDI output 2 lines
——
: Can be set.
—: Cannot be set.