Filter
Top Products
3-14 Telephone Features
C 3.2 Telephone Features
Call Forwarding — SUMMARY
Automatically transfers incoming calls to another extension or to an external destination.
The following types are available.
Type Description
Call Forwarding
— All Calls
Call Forwarding
— Busy/No Answer
Call Forwarding
— to Outside (CO) Line
Call Forwarding
— Follow Me
All incoming calls are forwarded to another extension.
All incoming calls are forwarded to another extension
when you do not answer or your extension is busy.
All incoming calls are forwarded to an outside (CO) line.
Allows you to set the “Call Forwarding — All Calls”
feature from another extension.
Note: You can also set Voice Mail as the forwarding destination. Refer to “Voice Mail
Integration for KX-TVS50/KX-TVS75/KX-TVS100” in this manual.
Conditions
• To cancel the Call Forwarding features, refer to “Call Forwarding — CANCEL” in this
manual.
• Call Forwarding can only be extended to one target telephone. For example, extension
A is forwarded to extension B, and if extension B tries to set Call Forwarding to
extension C, an alarm tone will be heard and the setting will be rejected.
If extension B has already set Call Forwarding to extension C, and extension A tries to
set Call Forwarding to extension B, the setting will be also rejected.
• If the destination extension has already set “Do Not Disturb”, you cannot forward any
calls to the extension.
• Setting a new “Call Forwarding” feature (All Calls, Busy/No Answer, etc.) cancels any
other “Call Forwarding” features or the “Do Not Disturb (DND)” feature.
• If your entry is valid, confirmation tone 1 (one beep) is sent. If your entry is the same
as previously programmed data, confirmation tone 2 (two beeps) is sent. Refer to the
“Tone List” in the Appendix (Section 5).
• You can call the original extension from the Call Forwarding destination extension.
(For example, Boss Secretary)
• Camp-On recall and Hold recall are not forwarded.
Ext A
Ext B Ext C
(Yes)
Ext A
Ext B Ext C
(Yes)