Filter
Top Products
2-14 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible button (CO, DSS, MESSAGE, PF) as a One-Touch
Dialing button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press the desired Flexible button you wish to
assign as a One-Touch Dialing button and dial 2,
or press the desired PF button.
Press STORE.
AUTO DIAL
STORE
Enter the desired number
(extension number,
phone number, etc.).
desired number
2
No.
CO
MESSAGE
PF
)(
+
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
Not Stored
• Up to 24 digits can be stored.
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
— To exit the Station Programming mode, set the MEMORY switch to “SET”
Conditions
• The number can be an extension number, telephone number or feature number. Up to
twenty-four digits can be stored in a One-Touch Dialing button.
• To store the telephone number of an external party, a line access code (9 or 81 through
86) must be stored as the first digit.
• You can store a number consisting of twenty-five digits or more by dividing and
assigning it into two One-Touch Dialing buttons. In this case, the line access code
should be stored in the first button.
• To store an account code, press and then enter the desired code. The account
codes must be stored after the line access code.
• You can use 0 through 9, , #, PAUSE and INTERCOM for storing.
#: change the dialing mode (Pulse to Tone)
PAUSE: pause
INTERCOM: secret