Filter
Top Products
3-48 Telephone Features
C 3.2 Telephone Features
Conditions
• System Programming is required to execute this feature.
• When an Unattended Conference is established, an alarm tone is sent to both outside
parties fifteen seconds before the assigned time limit (default: 10 minutes). “Hold
Recall” is activated at the extension that leaves the conference fifty seconds before the
time out. The call is disconnected when the time out expires unless the extension
returns to the conference.
• For example, if you are on-hook and hear “Hold Recall” during the Unattended
Conference mode, the display will show “CO 2 & CO 3” for fifty seconds before the
time out.
Programming References
• System Programming — Installation Manual
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[606] Call Transfer to an Outside (CO) Line
Feature References
Conference
Hold Alarm/Hold Recall (→ See the Installation Manual.)
PT
PT
Conference, Unattended
When you are in a conference with two outside parties, you can leave the conference call
allowing the other two parties to continue their conversation.
To establish an Unattended Conference
PT
Press CONF to leave the conference.
CONF
During a conversation with two outside parties
PT
Press the CO flashing green moderately.
CO
• An outside-to-outside (CO-to-CO) line call between the other two parties is established.
To return to the conference