Filter
Top Products
Telephone Features 3-109
3.2 Telephone Features S
Conditions
• System Speed Dial numbers must be stored by System Programming.
• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.
• You may press a CO button or dial a line access code to select a desired outside (CO)
line before pressing the AUTO DIAL/STORE button or dialing *.
• It is possible to change toll restriction COS number with this feature (Toll Restriction
for System Speed Dialing). In this case, System Programming is necessary.
• A System Speed Dial number can be divided when stored.
<Example>
If the number is divided and stored in System Speed Dial numbers 01 and 02,
press: [AUTO DIAL/STORE] [0] [1] [AUTO DIAL/STORE] [0] [2].
• The dialed number appears on the display.
• A rotary telephone cannot use this feature.
Programming References
• System Programming — Installation Manual
[001] System Speed Dialing Entry
[301] Toll Restriction — System Speed Dialing Boundary Class
Feature Reference
Toll Restriction for System Speed Dialing
PT
PT
PT
System Speed Dialing
Allows you to make a call using pre-programmed speed dial numbers. This system
supports one hundred speed dial numbers which are available to all extension users.
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
system speed dial no.
Enter a system speed dial number
(00 through 99).
AUTO DIAL
STORE
For a PT
For an SLT
For a PT: Press AUTO DIAL/STORE.
For an SLT: Dial .
• You will not hear a tone.
• The AUTO DIAL/STORE indicator lights.
• The AUTO DIAL/STORE indicator
light turns off.