Filter
Top Products
Station Programming (Personal Programming) 2-17
2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• You can assign the same outside (CO) line to an S-CO and G-CO button.
PT
Press the desired Flexible
CO button you wish to assign
as an S-CO button.
Dial 0.
0
Press STORE.
AUTO DIAL
STORE
Enter the outside (CO) line
number (1 through 6).
outside line (CO) no.
CO
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
CO—
<PT Display Example>
outside (CO) line number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
CO—x