Filter
Top Products
Station Programming (Personal Programming) 2-21
2.2 Station Programming (Personal Programming)
Outside (CO) Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at
your extension.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Press STORE.
AUTO DIAL
STORE
Dial 3.
3
Enter the outside (CO) line numbers
you want to ring (1 through 6).
outside (CO) line no.
<PT Display Example>
RNG:1,2,3,4,5,6
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Conditions
• The “Flexible Ringing Assignment” should be set to “Enable”. (Refer to System
Programming.)
• When an outside call is received at extension but doesn’t ring, the CO indicator will
flash. If you want to answer the outside call, press the flashing CO button.
Programming References
• System Programming — Installation Manual
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch